Fluke T+Pro Canada Electrical Tester Safer than traditional solenoid testers and fully compliant with NFPA 70E Item NO.: 548623

Safer than traditional solenoid testers and fully compliant with NFPA 70E*

The T+PRO Electrical Testers offer all the functionality that electricians look for in volt meters and voltage and continuity testers:

• Three ways to detect AC/DC voltage: light, sound, and vibration
• Added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight
• The T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing

Safer than traditional solenoid testers:

• Solid-state tester design
• CAT IV 600 V, CAT III 1000 V rated

• Complies with NFPA 70E*

• Specifications: Fluke T+Pro Canada Electrical Tester

  Specifications
  Temperature	Operating	-10°C to 55°C (14°F to 131°F)
  	Storage	-30°C to 60°C (-22°F to 140°F)
  Relative humidity	90%	0°C to 30°C (32°F to 86°F)
  	75%	30°C to 40°C (86°F to 104°F)
  	45%	40°C to 50°C (104°F to 122°F)
  Altitude	Operating	2,000 m (approx. 6,561.6 ft)
  	Storage	10,000 m (approx. 32,808.4 ft)
  Battery type/life	AAA (2); 40 hours
  Shock, vibration	Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
  Safety	ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV Compliance to NFPA 70E1
  AC bandwidth	45 Hz to 66 Hz
  Maximum working Voltage	1000 V AC/DC
  Maximum measurable voltage	600 V AC/DC
  Duty cycle	Indefinitely for voltages up to 240 V
  	For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off
  	For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s
  Voltage hazard LED	LEDs turn on at voltages > 30 V AC/DC ±35%
  LED voltage indication levels	12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 347 V, 480 V, 600 V
  LEDs	LEDs turn on between 90% and 100% of the indicated voltage on the LED, except for the 12 V LED which turns on between 50% and 100%
  LCD accuracy	AC voltage	±(3% rdg + 2 digits)
  	DC voltage	±(2% rdg + 2 digits)
  	Resistance	±(5% rdg + 3 digits)
  LCD resolution	0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V
  	0.01 kΩ for resistance measurement
  GFCI test current	100 V - 150 V @ 6 mA - 9 mA AC, 150 V - 240 V < 12 mA
  Standard input test current	< 5 mA
  Size (H x W x L)	1.3 x 2.15 x 7.6 in (3.3 x 5.46 x 19.3 cm )
  Weight	9.9 oz (0.28 kg)
  1. When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.