Fluke a3004 FC Wireless 4-20 mA DC Clamp Meter Item NO.: 546126

See it. Save it. Share it.

All the facts, right in the field. The Fluke a3004 FC Wireless 4-20 mA Current Clamp Meter is one member of a family of wireless test tools that let you record and log data over time and share test data using the Fluke Connect® app with ShareLive™ video call.

Fluke Connect Wireless Test Tools put tools where measurement access or separation may be an issue. It's simple. Connect the a3004 FC current meter, or any of the other Fluke Connect remote meters, and read the results on the Fluke Connect Wireless Multimeter or a PC from a safe distance.

Better still, the Fluke Connect test tools can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere.

Test or troubleshoot 4-20mA control loops used with drive systems, plc's, or building energy management systems.

• Save time by NOT breaking the loop on 4-20 mA signal measurements.
• Are you spending time:
  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
• Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
• Send data to your laptop and go from logging to analysis and diagnosis.
• Use the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data.

• Perform for analysis with your PC and share the results using Fluke Cloud™ storage and ShareLive™ video call. View data or graphs to get input from team members.

• Specifications: Fluke a3004 FC Wireless 4-20 mA DC Clamp Meter

  DC Current Function
  Range	0.05 mA to 20.99 mA DC 21.0 mA to 99.9 mA DC
  Resolution	0.01 mA 0.1 mA
  Accuracy	0.2% ± 5 digits 1.0% ± 5 digits
  Specifications
  LCD w/backlight	3 ½ digits
  Log rate/Interval	1 sec minimum/adjustable by PC or front pannel
  Battery type	2 AA NEDA 15 A IEC LR6
  Battery life	45 hours
  Memory	Record up to 65,000 readings
  RF communications	2.4 GHz ISM Band
  RF communication range	Open air, unobstructed: Up to 20 m Obstructed, sheetrock wall: Up to 6.5 m Obstructed, concrete wall or steel electrical enclosure: Up to 3.5 m
  Operating temperature	-10°C to +50°C
  Storage temperature	-40°C to +60°C
  Temperature coefficient	Add 0.1 X (specified accuracy) /°C (< 18°C or > 28°C)
  Operative humidity	90% at 35°C 75% at 40°C 45% at 50°C
  Altitude	Operating 2,000 m Storage 12,000 m
  EMC	EN 61326-1:2013
  Maximum voltage between terminal and earth ground (module)	30 V DC or AC rms
  Certifications	CSA C-US CE FCC: T68-FBLE IC: 6627A-FBLE
  Ingress Protection (IP) rating	IP42
  Jaw opening	4.5 mm
  Size (HxWxD)	16.5 mm x 6.35 cm x 1.4 cm (6.5 in x 2.5 in x 1.4 in)
  Weight	0.299 kg (0.8 lb)
  Note: Not compatible with Fluke CNX test tools.